|
The wide range
of our axial fans has been designed to answer any performance need.
For special
executions (products in stainless steel, high temperature resisting properties,
particular applications) please consult our Sales and Technical Department.
  SPM
Series
Short casing fans with streamlined nozzle and single flange, are particularly
suitable for extraction of polluted air, even damp and/or dusty and they
are specially used in foundries, cement factories, paper mills, joinery
works, garages and public rooms.
Moreover, they are used in unit heaters,
cooling towers and all the applications where large flow rates and low pressure
values are required.
Impeller with blades in Aluminium alloy or resin (glass-charged polypropylene).
Diameter sizes from 315 to 710 mm
Capacity from 240 to 33.600 m3/h
Total Pressure up to 115 daPa
Temperature of the conveyed fluid: -10°C to +60°C.
Download
PDF file (1,27MB inclusive series SPMD-SPMDR-SI-SIR)
 SPMD
& SPMDR Series
Long casing fan with double flange, are particularly suitable for extraction
of polluted air, even damp and/or dusty; they may be installed between channels
and are especially used in foundries, cement factories, paper mills, joinery
works and garages.
Moreover, they are used in unit heaters, cooling towers
and all the applications where large flow rates and low pressure values are
required.
Blade material
SPMD from diam. 800 to diam. 1000 mm : resin (glass-charged polypropylene),
Aluminium
SPMD from diam. 1120 to diam. 1250 mm : resin (glass-charged polypropylene),
reinforced resin (glass-charged polyamide), Aluminium
SPMD diam. 1400 mm : resin (glass-charged polypropylene)
SPMDR from diam. 1120 to diam. 1600 mm :in special heavy-duty Aluminium
alloy
Diameter sizes SPMD from 800 to 1400 mm.
Diameter sizes SPMDR from 1120 to 1600 mm.
Capacity from 2.100 to 150.000 m3/h
Total Pressure up to 165 daPa
Temperature of the conveyed fluid: -10°C to +60°C.
Download
PDF file (1,27MB inclusive series
SPM-SI-SIR)
 SI
& SIR
Series
Long casing fans with double flange and the inspection door, particularly
suitable to be channelled and for use in exhaust plants, drying systems, conditioning
systems, for tunnel and subway ventilation.
Blade material
SI diam. 315 through 1000 mm : resin (glass-charged polypropylene), Aluminium
SI diam. 1120 through 1250 mm : resin (glass-charged polypropylene), reinforced
resin (glass-charged polyamide), Aluminium
SI diam. 1400 mm : resin (glass-charged polypropylene)
SIR diam. 1120 through 1600 mm : in special heavy-duty Aluminium alloy
Diameter sizes SI from 315 to 1400 mm.
Diameter sizes SIR from 1120 to 1600 mm. .
Capacity from 240 to 150.000 m3/h.
Total Pressure up to 165 daPa
Temperature of the conveyed fluid: -10°C to +60°C.
Download
PDF file (1,27MB inclusive series
SPM-SPMD-SPMDR)
 SIT
SERIES
Belts & pulleys long casing fans with double flange and the inspection
door, particularly suitable to be channelled and for use in exhaust plants,
drying systems, conditioning systems, for tunnel and subway ventilation.
Blade material:
Diam. 315 through 1000 mm : resin (glass-charged polypropylene), Aluminium
Capacity from 600 to 54.000 m3/h
Total Pressure up to 130 daPa
Temperature of the conveyed fluid: -10°C to +60°C
Download
PDF file(1,07MB )
 EP
40
SERIES
The EP axial ventilator is suitable for the transport of dusty air .
Due to its plastic structure and the blade, which is made entirely in resin,
it is particularly suitable for use in premises with a high concentration
of corrosive pollutants, such as cowsheds, breeding sheds, industrial units,
etc.
Blade material:
Diam. 400 made entirely in reinforced glass fibre resin; the high-yield wing
shaped
blades can be oriented when stationary.
Capacity up to 4.500 m3/h
Temperature of the conveyed fluid: -10°C to +50°C
Download
PDF file (395 KB)
|
